Advantech-DLoG DLT-V83 Series Скачать руководство пользователя страница 120

Страница: 120 / 157

Mechanical mounting

120 / 157

DLT-V83 Operating Instructions V2.00

13.2.

Overview of mounting steps

Requirement: The vehicle/installation location must be prepared (e.g. connection to the ignition,

correct voltage, etc.)

We recommend the following sequence for the mechanical and electrical installation:

−

Determine a suitable mounting position for the DLT-V83.

−

Secure device mounting (mounting bracket, RAM mount; optional).

−

Connect external accessories to the DLT-V83.

−

Install an easily accessible disconnecting device, such as a switch.

−

Connection to the power supply.

−

Seal cable bushings with cable grommets and dummy grommets.

−

Close the DLT-V83 with cable cover.

−

Mount the DLT-V83 on the device mounting bracket (follow mounting instructions).

13.3.

Connecting external accessories to the DLT-V83

The DLT-V83 must be disconnected from the power supply:

−

before external devices (e.g. scanner, keyboard) are connected or disconnected.

−

before using the interfaces underneath the antenna.

−

and before the DLT-V83 is connected to a network.

NOTICE: Property damage

Observe the following when connecting/removing external devices:



Only use accessories that have been tested and approved by Advantech for the respective DLT-

V83.



The DLT-V83 may not be connected to the power supply if external devices are being

connected/removed (not applicable for USB devices). Otherwise considerable damage could be

caused to both the DLT-V83 and the peripheral devices.



Make sure that peripherals with their own power supply are either switched on at the same time as

the DLT-V83 or after the start of the DLT-V83.



Otherwise, you must ensure that a backflow from the external device to the DLT-V83 cannot take

place.



Only power up the DLT-V83 when all devices have been connected and the DLT-V83 has been

closed correctly (remember the cable cover!). Otherwise, you may damage the

DLT-V83.

Please observe the mounting instructions supplied with the optional accessories.

Содержание DLT-V83 Series






























































































































































Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды

Advantech-DLoG DLT-V83 Series, Руководство по эксплуатации

Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды