Advantech-DLoG DLT-V83 Series Скачать руководство пользователя страница 55

Страница: 55 / 157

Operating the device

DLT-V83 Operating Instructions V2.00

55 / 157

WARNING

Electric shock due to incomplete switching off of the DLT-V83 with integrated UPS.

Because of the battery packs, the integrated UPS may still carry current even if the DLT-V83

itself is switched off.

Reason: If the DLT-V83 has been configured to also start without <Power> button and ignition

in the "DLoG Config" program, this setting will need to be changed first.

Otherwise, the DLT-V83 will restart after a short pause as long as there is available battery

capacity.

To completely switch off the device:



Shut down the DLT-V83 via the operating system function.



Disconnect from the power supply.



Open the cable cover.



Unplug the UPS battery.

Vehicle EMERGENCY-OFF switch does not switch off the DLT-V83 with integrated UPS.

If a DLT-V83 with integrated UPS is installed in a vehicle, the EMERGENCY-OFF switch of the

vehicle has no effect on the DLT-V83.

This also applies to the peripherals supplied by the device.

NOTICE: Property damage

Overvoltage on the DLT-V83 when charging the vehicle battery.

While the vehicle battery is charging:

−

The DLT-V83 must be disconnected from the vehicle battery.

−

Or it must be ensured that the maximum permitted input voltage of the DLT-V83 is not

exceeded.

Charging the integrated UPS correctly.



Do not connect damaged cable covers with battery packs to the DLT-V83; do not charge.



Battery packs become warm while charging; this is normal. However, if they become

excessively hot, immediately disconnect the DLT-V83 from the power source.



Do not continue to use the DLT-V83 if you notice an unusual level of heat or an unusual

smell during charging.



Provide for sufficient ventilation of the DLT-V83 when charging the battery pack.

Parking vehicles with DLT-V83 devices with the "Screen-Defroster and integrated UPS"

equipment combination.



Do not park or store vehicles on which DLT-V83 devices with a Screen-Defroster and an

integrated UPS are installed in areas with ambient temperatures below 0°C.



If vehicles on which DLT-V83 devices with a Screen-Defroster and an integrated UPS are

installed are parked or stored for a significant length of time, disconnect the DLT-V83 from

the vehicle battery.

Содержание DLT-V83 Series






























































































































































Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды

Advantech-DLoG DLT-V83 Series, Руководство по эксплуатации

Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды