OsmoPRO® Multi-Sample Micro-Osmometer User’s Guide
64
8.3 Sample probe
From the
Diagnostics
screen, press
SAMPLE PROBE
to enter the
Sample Probe
screen
(Figure 8.4). Here, the user can run up to 20 tests using reagents, the results for the samples
tested display in Ohms. Press
EXIT
to return to the
Diagnostics
screen.
Figure 8.4: Sample Probe
To start a sample probe test:
• Select the position to load with a sample tube from the window using the arrows.
NOTE:
On screen entry the system displays the next available tube position.
• Press
LOAD
.
• Turntable rotates to the selected tube position making it available for loading
• Load the sample onto the turntable.
• Press
TEST
.
Test Status is updated with test progress or error message, if any. The result is reported in
Ohms once the test is completed.
8.4 Barcode
From the
Diagnostics
screen, press
BARCODE
to view the
Barcode
screen. (Figure 8.5)
Figure 8.5: Barcode
