Advanced Instruments OsmoPRO Multi-Sample Скачать руководство пользователя страница 2

Страница: 2 / 88

OsmoPRO® Multi-Sample Micro-Osmometer User’s Guide

Copyright

written consent of Advanced Instruments. All trademarks are the property of Advanced

Instruments:

• OsmoPRO

•  Hot-Line™
•  Protinol™
•  Clinitrol™
•  Renol™

Advanced Instruments reviewed this guide thoroughly. All material contained within is believed

reliable, but the accuracy and completeness are not guaranteed or warranted, and are not

intended to be representations or warranties concerning the product described.

Hot-Line Technical Service

For any questions or problems regarding the proper operation of the instrument, contact the

Hot-Line Technical Service department by calling one of the following numbers.

•

If calling from the US or Canada, dial toll free 1-800-225-4034.

•

If calling from outside the US or Canada, dial +1-781-320-9000

•

Or fax to +1-781-320-0811.

Содержание OsmoPRO Multi-Sample

























































































Результаты поиска

Содержание OsmoPRO Multi-Sample

Отзывы:

Бренды по названию

Популярные бренды

Advanced Instruments OsmoPRO Multi-Sample, Руководство пользователя

Результаты поиска

Содержание OsmoPRO Multi-Sample

Отзывы:

Бренды по названию

Популярные бренды