OsmoPRO® Multi-Sample Micro-Osmometer User’s Guide
15
Feed paper from bottom
Figure 1.5: Printer Paper Roll
• Gently close the printer door until it snaps shut (Figure 1.6). The unrolled portion of
thermal paper should protrude from the printer slot with the door closed.
Advance paper button
Figure 1.6: Close Printer Door
1.6 Install turntable
• If the turntable is not presently installed on the instrument, place it on a flat surface with
the numbered side visible.
• Place a new probe wiper ring over the center knob of the turntable.
• Align the wiper ring so the wiper ring locating tab is in one of the depressions provided at
turntable position 1 and position 11. Verify all the turntable position numbers are visible
within the radial holes of the wiper ring (Figure 1.7).
