manualshive.com logo in svg

Advanced Instruments Anoxomat Mark II CTS, Руководство пользователя

Поделиться
Скачать
Advanced Instruments Anoxomat Mark II CTS Скачать руководство пользователя страница 42

42

Anoxomat 

Mark II CTS 

User’s guide

Appendix E

 Warranty and warranty duties

Advanced Instruments warrants that it:

1.    

Has produced equipment equal to or exceeding that of 
any competitive product in the same price range in 
standards of design, material and workmanship. 

2.    

Knows of no defects in design or materials which may 
cause bodily injury.

3.    

Will endeavor to advise the user of changes or 
improvements in the instrument as they are 
developed, so that the user may take steps to  
improve the safety and performance of his  
equipment throughout its useful life.

4.    

Will replace or repair equipment according to the 
guarantee on the attached warranty.

5.    

Will cooperate closely in common defense of any 
accident involving this equipment, or third-party  
suit against the user or operating personnel, if  
advised immediately by the user of the occurrence  
of any accident.

The user warrants that:

1.    

The instrument will be used reasonably.

2.    

The instrument will be regularly maintained according 
to this manual, including a log of all service, tests and 
repairs performed on the equipment, and records will 
be kept of all requests for repair made to Advanced 
Instruments where such repairs were beyond the ability 
of local service personnel.

3.    

The instrument will not be altered without written 
approval from Advanced Instruments.

4.    

Advanced Instruments will be notified immediately if 
any injury occurs in any association with the 
instrument and will be allowed prompt and thorough 
examination of the instrument in question.

5.    

Advanced Instruments will be held harmless in cases 
of injury arising (see definitions below):

• 

   Beyond the useful life of the equipment.

• 

   From unreasonable use.

• 

   When Advanced Instruments is not immediately 

notified of said injury.

• 

   From interpretation of results.

Содержание Anoxomat Mark II CTS



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды