ADTRAN NetVanta 1534, Руководство по установке

Страница: 22 / 48

Physical Descriptions NetVanta 1534/1544 Series
22 Copyright © 2013 ADTRAN, Inc. 61702590G1-34E
CONSOLE Interface
The CONSOLE interface is an EIA-232 serial port (DCE) that provides local management and
configuration (via a DB-9 female connector). Refer to Table A-1 on page 47 for pinouts.
RPS
The rear panel has a power input to a +12 VDC RPS. The RPS LED, located on the front panel of the
unit, indicates when the unit is being powered from the RPS.
Power Connection
The rear panel has a power input to the AC universal power supply. Please refer to Supplying Power to
the Unit on page 36 for connection details.
NetVanta 1544P Front Panel Design
The NetVanta 1544P front panel is shown below. Table 1 on page 25 describes all of the LEDs, and
Appendix A on page 47 shows the connector pinouts.
Figure 7. NetVanta 1544P Front Panel Layout
Front Panel Features
Status LED
The STAT LED is located on the left side of the unit and indicates the unit’s status.
Redundant Power Supply LED
The RPS LED is located on the left side of the unit and indicates when the unit is receiving power
from the RPS.
Extended Power Supply LED
The EPS LED is located on the left side of the unit and indicates when the unit is receiving power from
the EPS.
Link/Activity LEDs
The LINK/ACT LED is located on the left side of the unit and indicates that the port LEDs are
displaying link/activity status.
Power over Ethernet LED
The PoE LED is located on the left side of the unit and indicates that the port LEDs are displaying PoE
status.
VCID LED (Future Release)
The VCID LED is located on the left side of the unit and indicates that the port LEDs are displaying
VCID.
Connection directly to an external modem requires a cross-over cable.
NetVanta 1544P
VCID
PoE
LINK/ACT
EPS
RPS
STAT
25 26 27 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
1G 2.5G