ADTRAN NetVanta 1534, Руководство по установке

Страница: 35 / 48

NetVanta 1534/1544 Series Unit Installation
61702590G1-34E Copyright © 2013 ADTRAN, Inc. 35
Figure 14. NetVanta 1534P/1544P/1544F Wallmount Installation
Instructions for Wall Mounting the NetVanta 1534P/1544P/1544F
Step Action
1 Remove the mounting brackets. Rotate them 90 degrees so that the portion of the bracket with
the mounting holes is flush with the bottom of the chassis. Reattach the mounting brackets to
the chassis (see
Figure 14 ).
2 Decide on a location for the NetVanta. NetVanta 1534P/1544P/1544F units are mounted with
the front panel facing left (see
Figure 14 ). Keep in mind that the unit needs to be mounted at or
above eye-level so that the LEDs are viewable.
3 Prepare the mounting surface by attaching a board (typically plywood, 3/4-inch to 1-inch thick)
to a wall stud using #6 to #10 (2.5-inch or greater in length) wood screws.
Important! Mounting to a stud ensures stability. Using sheetrock anchors may not provide
sufficient long-term stability.
4 Have an assistant hold the unit in position as you install two #6 to #10 (1-inch or greater in
length) wood screws through the unit’s brackets and into the mounted board (see
Figure 14 ).
5 Proceed to the steps given in Supplying Power to the Unit on page 36 .
NetV
anta 1544P
VCID PoE
LINK/ACT
EPS
RPS
ST
A
T
25
26
27
28
12
34
56
78
91
0
11
12
13
14
15
16
17
18
19
20
21
22
23
24
1G
2.5G
25
26
27
28
1G
2.5G