ADTRAN NetVanta 1534, Руководство по установке

Страница: 16 / 48

Physical Descriptions NetVanta 1534/1544 Series
16 Copyright © 2013 ADTRAN, Inc. 61702590G1-34E
Status LED
The STAT LED is located on the left side of the unit and indicates the unit’s status.
Redundant Power Supply LED
The RPS LED is located on the left side of the unit and indicates when the unit is receiving power
from the RPS.
VCID LED (Future Release)
The VCID LED is located on the left side of the unit and indicates that the port LEDs are displaying
VCID.
LED Mode Switch (Future Release)
The LED mode switch is located on the left side of the unit and is used to toggle Ports 1 through 28
between link/activity and VCID display modes.
10/100/1000Base-T Ethernet Interfaces
The front panel contains 24 10/100/1000Base-T Ethernet interfaces (RJ-45). These interfaces are
arranged in stacked pairs, with the numbers
1 through 24 screened from left to right directly above the
corresponding ports. Status LEDs for each stacked pair of interfaces are located directly over the
interfaces. Refer to
Table A-2 on page 47 for pinouts.
NetVanta 1534 Rear Panel Design
The NetVanta 1534 rear panel is shown below.
Figure 2. NetVanta 1534 Rear Panel Layout
Rear Panel Interfaces
SFP Slots
The rear panel contains four industry standard SFP slots for fiber or copper connectivity. The
interfaces numbered
25 and 26 support 1000Base-X SFP modules and their status LEDs are located on
the front panel of the unit. The interfaces numbered 27 and 28 support both 1000Base-X and
1000/2500Base-X SFP modules and their status LEDs are also located on the front panel of the unit.
Refer to
Table A-3 on page 48 for pinouts.
CONSOLE Interface
The CONSOLE interface is an EIA-232 serial port (DCE) that provides local management and
configuration (via a DB-9 female connector). Refer to Table A-1 on page 47 for pinouts.
Connection directly to an external modem requires a cross-over cable.
25 26 27 28
RPS - 12VDC
1G 2.5G