ADTRAN NetVanta 1534, Руководство по установке

Страница: 45 / 48

NetVanta 1534/1544 Series NetVanta 1131 RPS/EPS
61702590G1-34E Copyright © 2013 ADTRAN, Inc. 45
Powering the NetVanta 1131 and the NetVanta Switch
Follow these instructions to power your NetVanta 1131 RPS/EPS and your NetVanta switch.
Your NetVanta unit is now ready to be configured and connected to the network. For information on switch
configuration for a specific application, refer to the configuration guides provided on the
ADTRAN Support
Community . For details on the command line interface (CLI), refer to the AOS Command Reference Guide . All
other related documents are also available online at http://supportforums.adtran.com .
• This unit shall be installed in accordance with Articles 300 and 400 of NEC NFPA 70.
• Power to the AC system must be from an appropriately rated and grounded source.
• Maximum recommended ambient operating temperature is 50
o
C.
Instructions for Powering the NetVanta 1131 and the NetVanta Switch
Step Action
1 Plug the female end of the NetVanta 1131 unit’s power cord (provided with the unit) into the
power receptacle labeled
Power on the rear panel of the unit.
2 Connect the other end (3-prong plug) of the unit’s power cord to the proper 110 to 130 VAC or
190 to 240 VAC grounded receptacle.
3 Plug the female end NetVanta switch’s power cord (provided with the unit) into the power
receptacle on the rear panel of the unit.
4 Connect the other end (3-prong plug) of the NetVanta switch’s power cord to the proper 110 to
130 VAC or 190 to 240 VAC grounded receptacle.