NetVanta 1131 RPS/EPS
NetVanta 1534/1544 Series
42
Copyright © 2013 ADTRAN, Inc.
61702590G1-34E
Dual Rackmount
Figure 19. Rack Mounting the NetVanta 1131 Using the Dual Mounting Tray
Instructions for Rack Mounting the NetVanta 1131 (Dual Mount)
Step
Action
1
Install the dual mounting tray (P/N 1700534F1 purchased separately) in a stationary equipment
rack using the mounting brackets and four screws provided.
2
To allow proper grounding, scrape the paint from the rack around the mounting holes where the
tray will be positioned.
3
Position two NetVanta 1131 units side by side on the dual mounting tray lining up the holes in
the front of the units with the holes in the tabs on the front of the tray (see
Figure 19
).
Important!
To avoid damaging the unit when attaching it to the dual mounting tray, use only the
screws supplied with the tray.
4
Insert the provided screws through the tabs into the units securing them with a screwdriver.
5
Proceed to the steps given in
Connecting the NetVanta 1131 and the NetVanta Switch on
page 44
.
Содержание NetVanta 1534
Страница 10: ...List of Figures NetVanta 1500 Series Hardware Installation Guide 10 Copyright 2013 ADTRAN Inc 61702590G1 34E...
Страница 12: ...List of Tables NetVanta 1500 Series Hardware Installation Guide 12 Copyright 2013 ADTRAN Inc 61702590G1 34E...
Страница 46: ...NetVanta 1131 RPS EPS NetVanta 1534 1544 Series 46 Copyright 2013 ADTRAN Inc 61702590G1 34E...