ADTRAN NetVanta 1534, Руководство по установке

Страница: 43 / 48

NetVanta 1534/1544 Series NetVanta 1131 RPS/EPS
61702590G1-34E Copyright © 2013 ADTRAN, Inc. 43
Wall Mounting the NetVanta 1131
The NetVanta 1131 can be mounted on a wall by following these steps:
Figure 20. Wall Mounting the NetVanta 1131
Instructions for Wall Mounting the NetVanta 1131
Step Action
1 Attach the wallmount brackets so that the portion with the mounting holes is flush with the
bottom of the chassis.
2 Decide on a location for the unit. NetVanta 1131 units are mounted with the front panel facing
left (see
Figure 20 ). Keep in mind that the unit needs to be mounted at or above eye-level so
that the LEDs are visible.
3 Prepare the mounting surface by attaching a board (typically plywood, 3/4-inch to 1-inch thick)
to a wall stud using #6 to #10 (2.5-inch or greater in length) wood screws.
Important! To avoid damaging the unit when attaching the mounting brackets, use only the
screws supplied with the unit.
4 Have an assistant hold the unit in position as you install two #6 to #10 (1-inch or greater in
length) wood screws through the unit’s brackets and into the mounted board (see
Figure 20 ).
5 Proceed to the steps given in Powering the NetVanta 1131 and the NetVanta Switch on
page 45 .