ADTRAN NetVanta 1534, Руководство по установке

Страница: 17 / 48

NetVanta 1534/1544 Series Physical Descriptions
61702590G1-34E Copyright © 2013 ADTRAN, Inc. 17
RPS
The rear panel has a power input to a +12 VDC RPS. The RPS LED, located on the front panel of the
unit, indicates when the unit is being powered from the RPS.
Power Connection
The rear panel has a power input to the AC universal power supply. Please refer to Supplying Power to
the Unit on page 36 for connection details.
NetVanta 1534P Front Panel Design
The NetVanta 1534P front panel is shown below. Table 1 on page 25 describes all of the LEDs, and
Appendix A on page 47 shows the connector pinouts.
Figure 3. NetVanta 1534P Front Panel Layout
Front Panel Features
Status LED
The STAT LED is located on the left side of the unit and indicates the unit’s status.
Redundant Power Supply LED
The RPS LED is located on the left side of the unit and indicates when the unit is receiving power
from the RPS.
Extended Power Supply LED
The EPS LED is located on the left side of the unit and indicates when the unit is receiving power from
the EPS.
Link/Activity LED
The LINK/ACT LED is located on the left side of the unit and indicates that the port LEDs are
displaying link/activity status.
Power over Ethernet LED
The PoE LED is located on the left side of the unit and indicates that the port LEDs are displaying PoE
status.
VCID LED (Future Release)
The VCID LED is located on the left side of the unit and indicates that the port LEDs are displaying
VCID.
LED Mode Switch (Future Release)
The LED mode switch is located on the left side of the unit and is used to toggle Ports 1 through 48
between link/activity and VCID display modes.
NetVanta 1534P
25 26 27 28
1G 2.5G
VCID
PoE
LINK/ACT
EPS
RPS
STAT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24