SABRE
™
RANGER 5000 User Guide
© 2017 Addvalue Innovation Pte Ltd. All rights reserved.
51
2.
Command Port
is used when the users need to retrieve data from the serial cable.
It can be done through locally or remotely.
i. Select
Enabled
for
Command Port
and
Command Port Authentication
to enable
this feature.
ii. By default, the password for command port is
1234
. Users are recommended to
change the password for security purpose.
Command TCP port:
Control port for data transmission (example: 9000).
Standby for the host to prevent any conflict with other applications.
Data TCP port:
Acts as the TCP port that the data actually transmits through this port.
After establishing the connection, data can be transmitted in both directions, from PC to
port 9001 and from port 9001 to PC.
User can define up to 4 GPIO input and output ports.
GPIO input can be a switch or sensor which can provide information to the terminal.
GPIO output can be a LED which can display the output.
ADC is used for voltage measurement.
ADC 1 - Internal supply voltage of the terminal.
ADC 2 - External supply voltage to the terminal.
Can be used to monitor the input voltage of a solar panel or an external battery.
3.
Serial Port Settings
From the drop down menu, select the respective baud rates (from
4800
to
115200
).
Figure 64
4