SABRE
™
RANGER 5000 User Guide
© 2017 Addvalue Innovation Pte Ltd. All rights reserved.
20
Figure 20
7. Mount the Terminal on a Pole
Before mounting the terminal, ensure that the azimuth is correct by using a compass.
For example: North has an azimuth of 0°, East 90°, South 180° and West 270°.
1. Locate a vertical pole or column to mount the SABRE
™
RANGER 5000 terminal.
NOTE:
The mounting bracket is designed to be mounted on a 1 to 3 inch diameter pole.
2. Mount the pre-assembled terminal to the pole.
TIP:
If you have a long conduit of 10 metres or more, use the additional hole on the mounting
bracket with a cable tie to hold the conduit before mounting the terminal to a pole.
See figure 21 below.
Figure 21
3. Use the supplied washers, socket head cap screws (M8 x 120mm), and the saddle clamps to
mount the pre-assembled terminal on the pole.