SABRE
™
RANGER 5000 User Guide
© 2017 Addvalue Innovation Pte Ltd. All rights reserved.
25
10. Navigate to the Web Console
1.
The SABRE
™
RANGER 5000 terminal should be installed at an outdoor location with
the correct
Azimuth
. The terminal needs to be pointed towards the satellite to ensure
its connection to the satellite network. Turn ON the power supply to the terminal and
connect the Ethernet cable to your laptop/PC.
Figure 28
2. When the terminal is powered up, all the Antenna Pointing LEDs will flash briefly and
goes off. This indicates the terminal is ON.
3. After a short while, the terminal will go into Auto network registration mode. This is
indicated by synchronous flashing of all the LEDs. Press and hold Pointing Mode
button for more than 3 seconds to disable the Auto network registration mode and go
to the manual network registration mode.
Figure 29
Power Supply, Ethernet Cable
Pointing Mode Button
Antenna Pointing LEDs
Antenna
