SABRE
™
RANGER 5000 User Guide
© 2017 Addvalue Innovation Pte Ltd. All rights reserved.
26
Manual Network Registration
1. The Antenna Pointing LEDs indicate the received Global Beam signal strength. Slowly adjust
the
Elevation
of the terminal until the maximum number of LEDs illuminate. See the table
below for the number of LEDs lighting up vs the Global beam signal strength.
2. Another way to do the antenna pointing is to use the audio assisted pointing mode. In this
mode, a buzzer will emit an audio tone with its pitch changing according to the strength of the
global beam signal. The buzzer is disabled by default. To enable the buzzer, navigate to
Settings > Terminal Settings > Antenna Pointing buzzer.
Click
Apply
for the new setting to
take effect.
3. After the antenna is correctly pointed to the satellite, press the Pointing Mode button once to
exit the pointing mode and start the network registration process.
NOTE:
indicates flashing green LED and
indicates steady green LED.
LEDs Signal
Global Beam Signal Strength (dB)
0
– 40
41
– 47
48
49
50
51
52
53
54
55 and above
