7351 Series Digital Multimeter Operation Manual
5.9.5 Comparator Calculation
5-28
5. PASS condition setting
In the PASS condition setting, each comparator calculation result (HI, GO, and LO) is specified as
either PASS or not.
For example, if HI is specified as the PASS condition and LO and GO are not specified as the PASS
conditions, the comparator measurement result of HI is judged as PASS.
The comparator calculation results of LO and GO are judged as FAIL.
The PASS conditions are set in
.
1. Press
on the current setting display (PASS) to enable the PASS setting mode.
2. Select the PASS condition by using
and
.
6. Canceling the comparator calculation
The comparator calculation is canceled when any of the following conditions occur.
• The comparator calculation is set to OFF while the comparator calculation is performed.
• The measurement function is changed.
• The *RST command is executed.
7. Changing the measurement range and comparator operation
The comparator function operates continuously even if the measurement range is changed.
The reference values for the judgment are not changed because the values and the unit are set.
HI (Specified as the PASS condition)
GO (Not specified as the PASS condition)
LO (Not specified as the PASS condition)
MENU
MENU
..3.. CALC
PASS
LG H/_ _ H/_ G _/L _ _/
L _ H/LG _/_ GH/_ _ _
