ADAST V-line 899 LPG HYBRID Series, Руководство пользователя

Страница: 40 / 95

USER’S MANUAL V-line 899x.xxx/LPG HYBRID
34
Controlling of the dispenser V-line 899x.xxx/LPG, V-line 899x.xxx/LPG/М
1 STOP switch
2 Switch
3 Control Button – „SAFETY KEY DEAD MAN―
8.2. Dispensing with service
1. The operator controls the movement of vehicles within the liquefied gas filling area so that the
dispensing hose reaches the fuel tank filler of the vehicle.
2. Then he checks the connection to the filler of the storage tank which is led to the vehicle surface,
the type of the vehicle fuel tank filler and decides either for direct connection of the dispensing
nozzle to the filler of for the use of an adapter for different types of vehicle fillers. The operator
checks visually the condition and the wear of the filler which could result in gas leakage from the
vehicle. He performs smell test to identify prospective gas leakage from the vehicle. In case he
identifies any serious deficiencies, he has to refuse to fill the vehicle and recommends the
customer to visit an authorised service shop which can remedy the defects detected.
3. After connecting the dispensing nozzle to the vehicle filler the operator shall check the
connection and then pressing the button (3) or switch (2) on the dispenser to "ON" position resets
the counter automatically. After resetting the pump motor is started. The filling can be stopped
at any time by releasing the button (3) or switching to "OFF" position.
4. After filling and releasing the push-button or switch to "OFF" position, the dispensing nozzle is
disconnected from the vehicle tank and hung up.
ATTENTION!
In case of gas leakage or any danger the operator stops the filling!
IMPORTANT WARNING:
In case the tank is filled to be full (most frequent case) the automatic safety level regulation
controlling the filling of the tank to 80 % max. shuts off the supply by means of a mechanical limiter
without respect to manual push-button control.
8.3. Self dispensing
ATTENTION!
Dispenser for self-service must be within the meaning of Article. no. 4.5.8 EN 14678-1 provided
with a means ensuring an that the filling process can start and maintain only PRESS OF BUTTON
A DEAD MAN! By releasing this button must flow LPG immediately conclude!
1. Attach the dispensing nozzle to the filling end of the vehicle tank and check the connection.
1
2
3