Adast Systems MINOR V-line 899 Series, Инструкции по эксплуатации, обслуживанию и установке

Страница: 6 / 117

V-line 899x.xxx
USER’S MANUAL
2
NOTICE!
The requirements in this table are based on laws, standards and regulations that deal
with the design, installation and operation of dispensers. Failure to meet these
requirements may cause a dangerous situation or cause damage to the dispenser.
NOTE
Best practices, techniques, and methods to ensure correct installation, maintenance and
operation of the dispenser. Failure to do so may cause damage or poor performance of
the dispenser.
1.3. Operating, maintenance and installation instructions
Before installing, putting the dispenser into service or servicing, read this manual. Instructions must be
carefully read and understood before any manipulation of the product begins.
Pay special attention to warnings!
This document is a guideline compiled by the manufacturer of the dispenser for users, service personnel
and designers.
The information contained in this manual is binding and the manufacturer is not liable for any damages
caused by non-compliance.
The manufacturer reserves the right to make technical modifications without further notice due to
constant product development and improvement.
NOTICE!
Instructions are an integral part of the product and must be accessible to users
throughout the service life of the dispenser!
2. IMPORTANT NOTICE
ATTENTION!

The dispenser is a complex device that has to provide a variety of demanding
functions.

Prior to commissioning, clean the tanks, piping and clean the fuel. A clogged filter can
not be considered as a reason for warranty service.
 Must be revised electrical distribution and control correct wiring to prevent electrical
shock and ensure the safety of explosion - fuels are flammable liquids I. and II. hazard
classes!
The instructions for attendance, maintenance and installation serve the user to gain information on the
design, correct attendance, maintenance and safe installation.