Adast Systems MINOR V-line 899 Series, Инструкции по эксплуатации, обслуживанию и установке

Страница: 53 / 117

USER’S MANUAL
V-line 899x.xxx
49
-
check the condition of the dispensing nozzle; either repair or replace the nozzle according to
the type and extent of the failure
-
check the door lock function, grease it occasionally
-
pay attention to the cleanness of the dispenser, especially the glass of the counter
-
discharge sediments, water or other contaminants from the tank (containers of fuel) by means
of sludge pumps
12. TRANSPORT
The customer shall agree to the method of dispenser transport from the manufacturer in the contract.
In case Adast Systems, a.s. provides the transport for the customer, the product will be delivered to the
agreed destination. The manufacturer possesses the necessary knowledge of handling and transportation
methods. In case the customer is responsible for another method of transport, the manufacturer shall
ensure professional loading of the product but is not responsible for the transport itself. It is generally
accepted that the dispenser shall be shipped properly boxed and always fixed to the wood pallete. The
dispenser should be protected against damage (of covering and painting), displacement and rolling over
on the means of transport. All manipulation and transport have to be carried out only in vertical position
- the dispenser must not be put on its covering.
WARNING!

Only forklifts are allowed to be used for manipulation. If other
handling devices are used, Adast Systems, a.s. does not guarantee any
prospective damage!

All manipulation and transport have to be carried out only in vertical
position - the dispenser must not be put on its covering.
 Use protective equipment during handling.
13. INSTALLATION OF THE FUEL DISPENSER
ATTENTION!
THE DISPENSER INSTALLATION CAN BE CARRY OUT ONLY BY THE ORGANISATION
AUTHORISED BY MANUFACTURER!!!
WARNING!

Use protective equipment when handling and installing the dispenser.
 Observe the safety regulations when handling flammable liquids.
 Fire extinguishers - powder extinguishers must be provided during installation.
 It is forbidden to smoke and handle open fire in the immediate vicinity of the
dispenser.
Read carefully the article 1. IMPORTANT NOTICE.
The dispenser can be joined only to process equipment (tanks, piping) of perfect tightness and
cleanness. The supplier of the process equipment is responsible for its tightness and cleanness.