background image

Model • Modèle• Modelo

DKC445BL

For service, contact your nearest

service depot or call:

1-800-26- 

Danby

(1-800-263-2629)

to recommend a depot in 

your area.

En cas de réparation, veuillez

contacter votre service 

après-vente le plus près ou 

communiquez au: 

1-800-26- 

Danby

(1-800-263-2629)

pour connaître le service 

après-vente le plus proche.

Para obtener servicio,

comuníquese con el 

establecimiento de servicio 

más cercano o llame al: 

1-800-26- 

Danby

(1-800-263-2629)

para que le recomendemos un

establecimiento de su zona..

Keg Cooler

The model number can be found on the serial plate located on the
back panel of the unit.

All repair parts available for purchase or special order when you
visit your nearest service depot.  To request service and/or the
location of the service depot nearest you, call the TOLL FREE
NUMBER.

When requesting service or ordering parts, always provide the
following information:

•  Product Type
•  Model Number
•  Part Description

Glacière de bière en fût

Le numéro du modèle se trouve sur la plaque d'identification située
sur le panneau arrière de l'appareil.

Il est possible d'acheter les pièces de rechange ou de les obtenir par
commande spéciale en vous rendant à votre service après-vente le
plus proche. Pour effectuer des réparations ou obtenir l'adresse du
service après-vente le plus proche, veuillez composer le NUMÉRO
SANS FRAIS.

Pour effectuer des réparations ou commander des pièces de
rechange, veuillez donner les renseignements suivants :

• Type de modèle
•  Numéro du modèle
•  Description des pièces

Barril refrigerador

El número de modelo se encuentra en la placa de serie, ubicada en
el tablero posterior de la unidad.

Puede comprar todos los repuestos o hacer un pedido especial 
visitando el establecimiento de servicio más cercano a su domicilio.
Llame al TELÉFONO GRATUITO para obtener servicio de 
mantenimiento o la dirección del establecimiento de servicio más
cercano a su domicilio.

Siempre, al solicitar servicio de mantenimiento o hacer un pedido de
repuestos, debe suministrar la siguiente información:
• Tipo de artefacto
•  Número de modelo
•  Descripción del repuesto

Danby Products Limited, Guelph, Ontario Canada  N1H 6Z9

Danby Products Inc., Findlay, Ohio USA 45840

Printed in China (P.R.C.)

Содержание DKC445
















Отзывы: