Scope_manual_en-v110.docx
— 32 —
Fig. 70
– Saving the oscilloscope user setup
Fig. 71
– Choose one of the ten positions for saving the setup or
click the right mouse button to rename it
You can rename the original setup name by right-clicking the relevant button (see Fig. 71). the setup
in a newly opened window (see Fig. 72
– max. 20 characters, including spaces) and then confirm the
change by pressing the <
OK
> button (see Fig. 73). Click the cross to close the window (see Fig. 74).
Fig. 72
– You can rename the current setup by clicking the right
mouse button (maximum 20 characters, including spaces)
Fig. 73
– After you rename the setup (e.g. Test), confirm the change
by clicking the <OK> button
Click the cross to close the window.
Fig. 74
– Click the cross to close the window
Permanent
– to file
If you select this option, you can save the oscilloscope setup into a file (.oss) on storage media (Hard-
Disk, Flash-Disk, etc.) - see Fig. 75 and Fig. 76.
