Scope_manual_en-v110.docx
— 21 —
14.2.6
DESCRIPTION OF THE CONTROL AND SETTING OF TIME BASE
Time scale (time base)
setting
Selection of the size of the displayed part
of the record in respect to the entire record.
Control of the localization
(position) of the displayed part
of the record within the entire
record.
Visualization of the size and position of the displayed part of the
record within the entire record.
Fig. 41
– Description of the control and setting of time base (figure applies to version 1.00)
14.2.7
DESCRIPTION OF THE INVERT CONTROL FUNCTION
When the invert function is on, the waveform is displayed in an inverted manner.
Activate the inversion of the waveform in channel A (see Fig. 43) by pressing the
Inv A
button (see the cursor in
Fig. 42).
By pressing this button again (see the cursor in Fig. 43) the waveform of the channel B becomes inverted (see
Fig. 44). By pressing the button once more (see the cursor in Fig. 44) channels A and B become inverted (see
Fig. 45).
By pressing the
NoInv
button (see the cursor in Fig. 45) the inversion of the waveforms is cancelled (see Fig. 42).
The buttons are programmed in the so-
called “Repeat” style:
.......
.......
.......
