Scope_manual_en-v110.docx
— 81 —
1 -
.. Setup of number of arrays on the oscilloscope raster (range 1 to 16) for the record jump shift
when pressing the button Pos.3 or 6.
2 -
.............. Back to the record start.
3 -
.............. Back in jumps (transition in the record depends on the setup according to Pos. 1).
4 -
.............. Back continuously (speed of the record shift depends on the setup according to Pos. 8).
5 -
.............. Forward continuously (speed of the record shift depends on the setup according to Pos. 8).
6 -
.............. Forward in jumps (transition in the record depends on the setup according to Pos. 1).
7 -
.............. Forward to the record end.
8 -
.. Setup of the speed (range 1 to 300) of the continuous playing of the record (pre-set for Pos. 4
and 5).
Note: The range 1 - 300 determines the number of samples by which the signal is shifted approx. every 100
ms (depends on the Zoom and on the PC speed).
9 -
.............. Loading of a stored record (e.g. Record_25-8_13h25m.rec). You can see the date and time of
record storing in the file name. Both (together with the file path) are shown on the screen for
a better overview (starting from version sw 10.1) - see Fig. 185.
Fig. 185
– Name and location of an opened file loaded from an archive are shown on the screen (the screen shot is
taken from version 10.1
– only for illustration)