ACOUSTIC SOLUTIONS BD-1738, Инструкция по эксплуатации

Страница: 25 / 44

25
Radio aerial
Please make sure that the radio aerial on the back of the HiFi is fully extended and adjusted
before you attempt to tune to an FM radio station (a vertical position is recommended). This
will ensure that the maximum signal strength is available when the HiFi begins to scan.
Extending the aerial also ensures the best possible sound quality.
FM Radio mode
Check that your HiFi is in FM radio mode. If you are not already in FM radio mode, short
press the Mode button on the HiFi or on the remote control, then use the rotary Tune/Select
control on the HiFi or the
and buttons on the remote control to highlight FM radio.
Press the Tune/Select control on the HiFi or the Select button on the remote control to select.
When your HiFi is in FM mode it can receive Radio Data System or ‘RDS’ information if this is
being transmitted by the broadcaster. RDS information will often include the station name,
detail about the programme and the current time.
If you were listening to an FM station when you switched the HiFi to standby, then this station
will be automatically selected when you switch the HiFi back on.
Tuning to an FM station
In FM mode:
1. Use the rotary Tune/Select control on the HiFi to scroll through the FM frequency band.or
you can:
• Short press the scan button on the remote control to scan up the frequency band.
• Long press the scan button on the remote control to scan down the frequency band.
Your HiFi will search for the next available station and then stop on that station.
2. Short press the and buttons on the HiFi or on the remote control to fine tune
each frequency in 0.05MHz steps, if necessary.
Note: If reception is still poor check that the aerial is fully extended or try moving the HiFi
to another location.
Changing the scan setting
In FM mode:
1. Long press the Menu/Info button on the HiFi or the Menu button on the remote control.
Scan setting is highlighted. Press the rotary control on the HiFi to Select or the Select
button on the remote control.
Using the FM Radio