![background image](http://html.mh-extra.com/html/acer/altos-330-series/altos-330-series_user-manual_5812096.webp)
Chapter 3 - System Utilities 3-17
Host Adapter BIOS
This option enables or disables the SCSI controller BIOS. Default is Enabled.
The SCSI controller BIOS must be enabled if you want the computer to boot from
a SCSI hard disk drive connected to the SCSI controller. Several SCSISelect
options cannot be used unless the SCSI controller BIOS is enabled.
Support Removable Disks Under BIOS as Fixed Disks
This option allows you to control which removable-media drives are supported
by the SCSI controller BIOS. It is only valid if the SCSI controller BIOS is enabled.
The default setting is Boot Only. The following choices are available:
•
Boot Only
– Only the removable-media drive designated as the boot device
are treated as a hard disk drive.
•
All Disks
– All removable-media drives supported by the BIOS are treated as
hard disk drives.
•
Disabled
– No removable-media drives are treated as hard disk drives. In
this situation, software drivers are needed because the drives are not
controlled by the BIOS.
Support for removable-media drives means only
that the SCSI controller BIOS
allows
you to use
a removable-media drive as if it were a hard disk
drive; it does
not
mean you can remove the disk
media during operation. If a removable-media
SCSI device is controlled by the SCSI controller
BIOS,
do not
remove the media while the drive
is powered-on or you may lose data! If you want
to be able to remove media while the power is
on, install the removable-media device driver
and set this option to
Disabled
.