![background image](http://html.mh-extra.com/html/acer/altos-330-series/altos-330-series_user-manual_5812139.webp)
Index 5
R
Rear panel, 4-5
Rear panel features, 4-5
Reconfiguring the system, 1-17
Removing a DIMM, 1-16
Removing a Pentium II processor, 1-12
Removing the frame with installed hard
disks, 4-21
Removing the left cover, 4-8
Removing the right cover, 4-9
Reset resource assignments, 2-33
Running the SCSISelect utility, 3-5
S
SCSI device configuration, 3-12
SCSI disk utilities, 3-19
SCSI parity checking, 3-9
SCSI troubleshooting checklist, 3-24
SCSISelect configuration utility, 3-4
Advanced configuration options, 3-16
BIOS startup messages, 3-25
configure/view host adapter settings,
3-7
Default values, 3-4
Device connected, but not ready, 3-26
Disk drive configuration problems, 3-
27
Disk drives over 1 gbyte, 3-22
Multiple controllers, configuring, 3-21
Options, 3-6
Overview, 3-4
Running, 3-5
SCSI disk utilities, 3-19
Start unit request failed, 3-27
Troubleshooting checklist, 3-24
When to use, 3-5
SCSISelect utility options, 3-6
Advanced configuration options, 3-16
BIOS support for bootable CD-ROM,
3-18
Boot device options, 3-11
Configure/view host adapter settings
menu, 3-7
Display <Ctrl-A> message during
BIOS initialization, 3-18
Enable disconnection, 3-14
Format disk, 3-20
Host adapter BIOS, 3-17
Host adapter SCSI ID, 3-8
Host adapter SCSI termination, 3-10
Initiate sync negotiation, 3-13
Initiate wide negotiation, 3-14
Manimum sync transfer rate, 3-13
Multiple lun support, 3-18
SCSI device configuration, 3-12
SCSI disk utilities, 3-19
SCSI parity checking, 3-9
Send start unit command, 3-15
Support for ultra SCSI speed, 3-18
Support removable disks under BIOS
as fixed disks, 3-17
Verify disk media, 3-20
Send start unit command, 3-15
Serial port 1, 2-7
Serial ports 1 and 2, 2-16
Server management features, 1-18
Advanced server manager (ASM pro),
1-18
Setup password, 2-35
bypassing, 2-38
changing, 2-37
removing, 2-37
Silent boot, 2-24
Sleep mode, 2-22
SMBus interrupt (IRQ9), 2-20
Software error messages, 1-19
Standalone system, 4-2
Start unit request failed, 3-27
Support for ultra SCSI speed, 3-18