![background image](http://html.mh-extra.com/html/acer/altos-330-series/altos-330-series_user-manual_5812043.webp)
Chapter 2 - BIOS Utility 2-7
2.2.11 Total Memory
This parameter specifies the total amount of onboard memory. The memory size
is automatically detected by BIOS during the POST. If you install additional
memory, the system automatically adjusts this parameter to display the new
memory size.
1st Bank/2nd Bank/3rd Bank
The 1st Bank, 2nd Bank, and 3rd Bank parameters indicate the type and size of
DRAM installed in DIMM sockets 1, 2, and 3 respectively. The None setting
indicates that there is no DRAM installed. For the location of the DIMM sockets,
refer to Figure 1-1.
2.2.12 Serial Port 1
This parameter shows the serial port 1 address and IRQ setting.
2.2.13 Serial Port 2
This parameter shows the serial port 2 address and IRQ setting.
2.2.14 Parallel Port
This parameter shows the parallel port address and IRQ setting.
2.2.15 PS/2 Mouse
The BIOS utility automatically detects if there is a pointing device connected to
your system. If there is, this parameter displays the Installed setting. Otherwise,
this is set to None.