![background image](http://html.mh-extra.com/html/acer/altos-330-series/altos-330-series_user-manual_5812083.webp)
AcerAltos 330 Series User’s Guide
3-4
3.2
SCSI
Select
Configuration Utility
3.2.1
Overview
The SCSISelect configuration utility allows you to change SCSI controller settings
without opening the computer or changing jumpers.
3.2.2
Default Values
Table 3-1 lists the settings you can change with the SCSISelect utility and the
default value for each setting. Some settings apply globally to the SCSI controller
and all SCSI devices on the bus; other settings apply individually to each device
on the bus.
Table 3-1
Default Settings for SCSI Controller and All Devices
Global Settings for SCSI Controller and All Devices
Default Value
Host Adapter SCSI ID
7
SCSI Parity Checking
Enabled
Host Adapter SCSI Termination
Enabled
Boot Device Option
0 (zero)
Reset SCSI Bus at IC Initialization
Enabled
Host Adapter BIOS
1
Enabled
Support Removable Disks Under BIOS as Fixed Disks
Boot only
Extended BIOS Translation for DOS Drives > 1 Gbyte
Enabled
2
Display <Ctrl-A> Message During BIOS Initialization
Enabled
Multiple Lun Support
Disabled
BIOS Support for Bootable CD-ROM
Enabled
BIOS Support for Int13 Extensions
Enabled
Support for Ultra SCSI Speed
Enabled
Individual Settings for Each SCSI Device
Default Value
Initiate Sync Negotiation
Yes
Maximum Sync Transfer Rate
40 MBytes/sec.
Enable Disconnection
Yes
Initiate Wide Negotiation
Yes
Send Start Unit Command
1
No
Include in BIOS Scan
Yes
1
Settings are valid only if host adapter BIOS is enabled.
2
Do not change this setting from the default.