Chapter 2 - BIOS Utility 2-25
Even if your setting is Enabled, you may also switch to the text mode while
booting by pressing
when you see the “Ctrl-Alt-Esc key to enter setup”
message on the screen.
When set to Disabled, BIOS is in the conventional text mode where you see the
system initialization details on the screen.
2.7.5
Num Lock After Boot
This parameter allows you to activate the Num Lock function upon booting. The
default setting is Enabled.
2.7.6
Memory Test
When set to Enabled, this parameter allows the system to perform a RAM test
during the POST routine. When set to Disabled, the system detects only the
memory size and bypasses the test routine. The default setting is Enabled.
2.7.7
Configuration Table
This parameter allows you to enable or disable the appearance of the
configuration table after POST but before booting. The configuration table gives a
summary of the hardware devices and settings that BIOS detected during POST.
