![background image](http://html.mh-extra.com/html/acer/altos-330-series/altos-330-series_user-manual_5812091.webp)
AcerAltos 330 Series User’s Guide
3-12
SCSI Device Configuration
This option allows you to configure certain parameters of each SCSI device on the
SCSI bus. A screen similar to Figure 3-7 appears. The screen shows a column of
information for each SCSI ID, even if some SCSI IDs are not assigned to a device.
To configure a specific SCSI device, you need to know which SCSI ID it uses. See
SCSI Disk Utilities later in this section to learn how to determine which SCSI ID is
used by which device.
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit ( =default)
Adaptec AIC7880 Ultra/Ultra W SCSISelect (TM) Utility
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID ................................ 7
SCSI Parity Checking ................................ Enabled
Host Adapter SCSI Termination .................Low ON/High ON
Additional Options
Boot Device Options .................................. Press <Enter>
SCSI Device Configuration ........................ Press <Enter>
Advanced Configuration Options................ Press <Enter>
<F6> - Reset to Host Adapter Defaults
*
SCSI Device Configuration
SCSI Device ID #0 #1 #2 #3 #4 #5 #6 #7
Initiate Sync Negotiation ............. yes
yes
yes
yes
yes
yes
yes
yes
Maximum Sync Transfer Rate.....40.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
Enable Disconnection ................. yes
yes
yes
yes
yes
yes
yes
yes
Initiate Wide Negotiation ............. yes
yes
yes
yes
yes
yes
yes
yes
--------------------Options Listed Below Have NO EFFECT if the BIOS is Disabled -----------------
Send Start Unit Command ........... no
no
no
no
no
no
no
no
Include in BIOS Scan.................. yes
yes
yes
yes
yes
yes
yes
yes
SCSI Device ID #8 #9 #10 #11 #12 #13 #14 #15
Initiate Sync Negotiation ............. yes
yes
yes
yes
yes
yes
yes
yes
Maximum Sync Transfer Rate.....40.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
Enable Disconnection ................. yes
yes
yes
yes
yes
yes
yes
yes
Initiate Wide Negotiation ............. yes
yes
yes
yes
yes
yes
yes
yes
--------------------Options Listed Below Have NO EFFECT if the BIOS is Disabled -----------------
Send Start Unit Command ........... no
no
no
no
no
no
no
no
Include in BIOS Scan
yes
yes
yes
yes
yes
yes
yes
yes
SCSI Device Configuration
Figure 3-7 SCSI Device Configuration Screen for AIC-7880
Use the cursor keys (
↑
↓
) to move between options. Press Enter to display a pop-
up menu with a selection of values. Use the cursor keys (
↑
↓
) to select a value,
and press Enter to make your selection.