Acer AcerAltos 3102RS, Руководство пользователя

Страница: 134 / 303

User’s Guide
116
Disk Access Delay Time
Press
t
or
s
to select “Init Disk Access
Delay”, then press ENT . The current
setting will be displayed on the LCD.
Press
t
or
s
to select between 5 and 75
seconds or “No delay”, then press ENT
for two seconds.
•
Every time you change this setting, you must reset
the controller for the changes to take effect.
•
Refer to Chapter 3 section “Disk Access Delay
Time” for more information.
Tag Command Queuing
Firmware 2.11 now supports tag
command queuing with an adjustable
maximum tag count from 1 to 128. The
default setting is Tag Command Queuing
Enabled with a maximum tag count of 32.
This setting can be changed or tag
command queuing can be disabled. From
the Main Menu, select "View and Edit
Configuration Parameters." Then select
"Drive-side SCSI Parameters." Press
t
or
s
to select "Maximum Tag Count,"
then press <ENT>. The current setting
will be displayed on the LCD.
Press
t
or
s
to select between 1 and
128 seconds or "Disable", then press
<ENT>. for two seconds.
Init Disk Access
Delay - 15secs..
Init Disk Access
delay - 5secs..
Maximum Tag
Count - 32 ..
Maximum Tag
Count - 128 ..