Acer AcerAltos 3102RS, Руководство пользователя

Страница: 127 / 303

Chapter 7 General Front Panel Operation 109
To set the maximum synchronous clock
of this SCSI target, choose “Max.
Synchronous Xfer Clock”, then press
ENT . The current clock setting will be
displayed on the LCD.
Press
t
or
s
to change the clock, then
press ENT for two seconds. Refer to
Appendix D, Sync. Clock Period and
Sync. Clock Frequency, for more
information.
Maximum Transfer Width
Press
t
or
s
to select a SCSI target,
then press ENT .
To set the maximum transfer width of
this SCSI target, choose “Max. Xfer
Narrow Only” or “Max. Xfer Wide
Supported”, then press
ENT . The current
clock setting will be displayed on the
LCD.
Press ENT for two seconds to change
the setting.
Parity Check
Press
t
or
s
to select a SCSI target,
then press ENT .
Choose “Parity Check”, then press ENT .
The current clock setting will be
displayed on the LCD.
SCSI Target
CHL=1 ID=0 ..
SCSI Target
CHL=1 ID=0 ..
Max Synchronous
Xfer Clock# 12..
Max Xfer Wide
Supported ..
Parity Check
Enabled ..
Period 4ns units
Def= 12 ?
Max Xfer Narrow
Only ?