25
6. Press [
] [
] to select “DV” and press
[ENTER] to confirm.
7. Press [
] [
] to set the recording format, and
press [ENTER] to confirm.
If you select “DVD,” press [
] [
] to select a recording disc format
and press [ENTER]. For CD-R/RW discs, select the same format the
disc is first prepared as. (SVCD, VCD or Audio CD) For DVD disc, select
“DVD VR” format.
8. Press [
] [
] to select a recording mode and
press [ENTER].
(For DVD disc or HDD only)
9. Press [ENTER] to start recording.
Note:
This DVD-Recorder will stay in “Pause” mode when no DV input
signal is detected.
10. To pause recording.
Press [
PAUSE ] on the remote control to pause recording.
Press [
PAUSE ] again, if you want to resume recording.
11. To stop recording.
Press [ ] to stop recording.
R
ECORDING
One-touch recording
Use “One-touch recording” to start recording immediately in
30-minute blocks. Press [RECORD] twice to start a 30-minute
recording session. Press [RECORD] repeatedly to record longer
timed recordings, up to 6 hours in thirty-minute increments.
Pressing [RECORD] when the timed recording exceeds the 6-hour
constraint automatically sets “one-touch recording” off. For
recording on DVD discs, the length of recording depends on the
current recording mode/speed and the amount of time available on
the disc. For recording on the built-in HDD, the length of recording is
6 hours maximum.
DV recording
Before you start to record DV contents
This DVD recorder allows basic DV control functions with the remote
control. The DVD recorder is equipped with a camcorder control
(Play, Stop, FF or REW) feature via the DV Link connection. Simply
move the screen cursor to the desired function on the DV input
screen and press [ENTER] on the remote control.
If you want to record DV signals on a disc, press [ OPEN/CLOSE] to
open the disc tray and insert a recordable disc.
If a new recordable DVD-RW disc is used for recording, you need to
first select either “Quick preparation” or “Full preparation” and press
[ENTER] for the disc to be prepared for recording.
If a new recordable CD-R or CD-RW is used for recording, press
[
] [
] [
] [
] to select the disc format the disc is to be prepared
as and press [ENTER] .
1. Power on your TV and this DVD recorder.
2. Connect the DV cable (IEEE-1394 4-pin to 4-pin
cable) to both the DV Camcorder and the
DVD-Recorder.
3. Power on the DV Camcorder. Start “Playback
mode” on the DV Camcorder.
4. “Pause” the DV Camcorder at where you want
to record.
5. Press [
] [
] to select the “Record” icon, and
press [ENTER] to start recording.
Use “Easy Guider Menu” to record DV signal
Note:
Before playing a DVD+R, DVD-R or DVD-RW disc on another player,
you will first need to finalize the disc. Reference the “finalize”
function in the “Disc Tools” section for additional information.
