Accurex Lysun RFM-101 Скачать руководство пользователя страница 3

Страница: 3 / 41

Versions 1.0

Renal Function Analysis Meter

Identification

Meter: RFM-101

Test strips: RFS-101,CRS-101,UAS-101,URS-101
Important Safety Instructions

• Misuse of electrical meter can cause electrocution, burns, fire and other

hazards.

• Do not place the meter in liquid, nor put it where it could fall into liquid. If the

meter becomes wet, unplug it before touching it.

• Use the meter only for the purpose described in the instructions for use.

• Failure to use the meter in the manner specified by the manufacturer may

damage the protection provided by the meter.

• Do not use accessories which are not supplied or recommended by the

manufacturer.

• Do not use the meter if it is not working properly or if it has suffered any

damage.

• Do not let the meter come into contact with surfaces which are too hot to

touch.

• Do not use the meter where aerosol sprays are being used or where oxygen is

being administered.

• Do not use the meter out of doors.

• Control solution only purchased from local distributor or manufacturer

• Keep these instructions.

• For profesional use.

RFM-101 insert 20191125.indd 1

2019/11/27 10:41:57

Содержание Lysun RFM-101










































Результаты поиска

Содержание Lysun RFM-101

Отзывы:

Похожие инструкции для Lysun RFM-101

Бренды по названию

Популярные бренды

Accurex Lysun RFM-101, Руководство пользователя

Результаты поиска

Содержание Lysun RFM-101

Отзывы:

Похожие инструкции для Lysun RFM-101

Бренды по названию

Популярные бренды