Device menu
41
23
“General” tab
Setting
Camera
Selection of the camera (only previ-
ously activated cameras can be se-
lected)
Camera Name
Clear identification of the camera
(e.g. right car park, front entry gate
etc.)
Display Cam-
era Name
Box checked / not checked
Display Date
Box checked / not checked
Display Week
Box checked / not checked
Date Format
Format of the displayed date
Time Format
12-hour / 24-hour display
OSD Display
OSD transparent, flashing, non-
transparent etc.
OSD Display
Position
Screen position of the OSD
Copy To
Selection of whether the settings
should be copied to another camera
(and if so, to which camera)
Record
See page 24
5. Select “Advanced” to specify the other camera set-
tings.
“Advanced” tab
Setting
Camera
Selection of the camera (only
previously activated cameras
can be selected)
Image Settings
Brightness, contrast, satura-
tion and colour
Mask
Setting up of zones
Tamper Detection
Setting up of zones
Motion Detection
Setting up of zones
“Advanced” tab
Setting
Video Loss Detection
Activation according to the de-
finable schedule and notifica-
tion (display, acoustic alarm,
notification of surveillance
centre, e-mail, trigger of an
alarm output)
Copy To
Copies the settings
Setting up of zones
Note
When carrying out camera surveillance, you can
define zones that should not be monitored (private
zones).
You can also set up zones with special character-
istics (e.g. tamper monitoring or motion detection).
1. Activate the zone by checking the corresponding box
and clicking on “Area Settings”.
2. With the left mouse button held down, pull a frame
around the desired zone in the live screen.
3. When setting tamper monitoring and motion detec-
tion zones, you can open a pop-up menu by right-
clicking the mouse. The sensitivity can be set here
and the full-screen mode can be activated (for mo-
tion detection).
4. To exit the zone settings, right-click the mouse but-
ton and select
Exit
.
Note
After applying the settings, the set private zone is
displayed as a black rectangle in the image.
Zones for tamper monitoring and motion detection
are not displayed.
