ABL WALLBOX eMH2 EN, Инструкция по установке и эксплуатации

Страница: 21 / 36

Configuring the Wallbox eMH2 –
Stand-alone operation of a Slave wallbox |
21
24
Replace the electronic components cover onto the
housing base and fix it into place with the screw
you removed in
Step 3
.
25
Hook the housing cover onto the upper edge of
the housing base and lock it using the housing
cover key.
The wallbox must now be disconnected from the power supply for at least 10 seconds: It will be configured as a
stand-alone wallbox following the next start-up procedure.