ABL WALLBOX eMH2 EN, Инструкция по установке и эксплуатации

Страница: 12 / 36

| Installation –
Electrical connection of the wallbox
12
10
Insert the power supply cable through the large
rubber grommet into the housing base.
y
The back of the housing has a cable guide for
surface-mounted power supply cables.
y
For wiring up group installations, you must
insert the data cables through the small grom-
mets in the housing base.
11
Hang the housing base onto the panhead screws
you inserted at the installation site in
Step 6
.
12
Fix the housing base to the mounting surface by
inserting the two remaining panhead screws into
the two lower fixing points using the screwdriver
or electric drill with Torx bit.
y
Select a torque that will not distort the housing
base.
Electrical connection of the wallbox
ƒ
Electrical connection must be carried out by a qualified specialist electrical contractor!
ƒ
Ensure that the power supply cable remains disconnected from the electricity grid.
ƒ
Deactivate the RCCB in the wallbox and/or in the domestic power supply.