EN
-
32
3 Product description
xFUME
®
PRO/xFUME
®
COMPACT
2.9
Emergency information
► In the event of an emergency, immediately disconnect the following
supplies: electrical power supply, compressed air supply, coolant supply
and shielding gas supply.
► Consult the documentation for welding components.
3 Product description
3.1
Technical data
The volume the torch-integrated extraction system collects depends on many
factors, such as the position of the suction nozzle, the welding geometry and
the gas emission rate of the welding process.
Under optimal conditions, over 95% of the welding fumes can be captured
in accordance with ISO 21904-3.
3.2
Figures used
All figures can be found at the start of this document.
4 Putting into operation
Tab. 1
General torch data (EN 60974-7)
Temperature
(transport and storage)
−25 °C to +55 °C
Shielding gas (DIN EN ISO 14175)
CO
2
and mixed gases M21
Temperature (operation)
−10°C to +40°C
Wire types
Commercially available round
wires
Relative humidity
Up to 90% at 20 °C
Voltage rating
Peak value of 113 V
Type of use
Hand-held
Protection type of the device
connections (EN 60529)
IP3X
Type of voltage
DC
Control features in the handle
For 42 V and 0.1–1 A
Polarity of the wire electrode for DC
Usually positive
Tab. 2
Product-specific torch data (EN 60974
-
7 and EN ISO 21904-1)
Type
Type of
cooling
xFUME
®
PRO xFUME
®
COMPACT
DC
Wire
Ø
Gas flow
rate
Volume flow
1
1When used with welding fume extraction systems of the xFUME series.
Required
vacuum at the
connector
Load
Load
For induced speed 0.35 m/s
CO
2
M21
CO
2
M21
Suction nozzle
Connector
A
A
A
A
%
mm
L/min
m
3
/h
m
3
/h
kPa
25
Air
-
-
250
230
35
0.8–1.2
10–20
46
85
11.4
24
Air
270
250
-
-
60
0.8–1.2
10–20
70
92.8
11.4
36
Air
330
300
-
-
60
0.8–1.2
10–20
58.7
75.8
5.8
501
Liquid
500
450
-
-
100
1.0–1.6
10–20
58.7
81.3
6.6
Tab. 3
Liquid cooling/cable assembly specifications
Cooling data
Cable assembly
Supply temp.
Max. 40 °C
Standard length L
4.00 m, 5.00 m
Flow
Min. 1.5 L/min
Control lead
2-lead
Flow pressure
Min. 2.5 bar/max. 3.5 bar
Coolant connection
Plug-in nipple with DN 5
Cooling device output
Min. 800 W
WARNING
Health risk caused by inhaling harmful dust
The device contains harmful dust that can collect on surfaces and penetrate the ambient air as of the first use. It can damage the respiratory tract when inhaled.
► Check and wear your personal protective equipment.
► Use the device only in rooms with sufficient ventilation.
► The provided fume extraction system must be used when operating the device.
► Immediately remove dust deposits from the environment with a dust class H industrial vacuum cleaner or a damp cloth.
► Keep the air regulator closed if possible, and then open it only briefly.
WARNING
Electric shock due to touching live components
Touching live equipment parts may result in potentially fatal electric shocks.
► Only hold and move the welding torch using the intended handle piece.
