Abicor Binzel ABIDRIVE V2, Инструкция по эксплуатации

Страница: 34 / 136

EN - 2
BAL.0415.0 • 2018-10-22
TIG cold-wire feeder
EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
operating instructions as become necessary due to misprints, inaccuracies or product enhancements.
Such changes will, however, be incorporated into subsequent editions of the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their respective owners/
manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national subsidiaries and partners
worldwide can be found on our website at www.binzel-abicor.com
1 Identification EN-3
1.1 Marking EN-3
2 Safety EN-3
2.1 Designated use EN-3
2.2 Obligations of the operator EN-3
2.3 Personal protective equipment (PPE) EN-3
2.4 Classification of the warnings EN-3
2.5 Special Warnings for Operation EN-4
2.6 Warning and notice signs EN-4
2.7 Emergency information EN-4
3 Product description EN-5
3.1 Technical data EN-5
3.2 Abbreviations EN-6
3.3 Nameplate EN-6
3.4 Signs and symbols used EN-6
4 Scope of delivery EN-6
4.1 Transport EN-7
4.2 Storage EN-7
5 Functional description EN-7
6 Putting into operation EN-8
6.1 Transport and installation EN-9
6.2 Switching on the device EN-10
6.3 Front panel EN-11
6.4 Function types EN-14
6.5 Connecting the intermediate cable assembly EN-19
6.6 Connecting the shielding gas EN-20
6.7 Connecting the torch cable assembly EN-20
6.8 Mains port EN-21
6.9 Feeding in the wire EN-21
6.10 Replacing the drive rolls EN-22
6.11 Connecting the torch and the welding device EN-23
7 Operation EN-24
7.1 Control elements TIG cold-wire feeder EN-24
7.2 Connections and control elements EN-24
7.3 Putting into operation EN-25
8 Putting out of operation EN-25
9 Maintenance and cleaning EN-25
9.1 Maintenance intervals EN-26
10 Troubleshooting EN-27
11 Disassembly EN-28
12 Disposal EN-29
12.1 Materials EN-29
12.2 Consumables EN-29
12.3 Packaging EN-29
13 Appendix EN-30
13.1 ABIDRIVE V2 spare parts EN-30
13.2 Selecting the rolls EN-31
13.3 Spare rolls for the wire feeder EN-32
13.4 Circuit diagram TIG cold-wire feeder EN-33