Abicor Binzel ABIDRIVE V2, Инструкция по эксплуатации

Страница: 43 / 136

TIG cold-wire feeder 6 Putting into operation
BAL.0415.0 • 2018-10-22
EN - 11
6.3 Front panel
Display indicators
1 Display for parameter indicator
2 Display for parameter value
3 Feed rate [m/min]
4 Parameter time [sec]
5 Knob for setting parameters
6 Parameter selection
7 Function type selection
8 Wire feed
9 Wire retraction/function
button
Fig. 5
Front panel display
1 2
3
4
5
6
7
8
9
Left display (1) Right display (2)
Indicator Description Indicator Description
SPE Wire feed rate
(0.2 – 8.0 m/min) Value between
0.2 and 8.0 Indicator (3) (top) in m/min
dt Wire feed delay time
(0 – 3 sec.) Value between
0 and 3.0 Indicator (4) (bottom) in seconds
re Wire retraction time (off – 3 sec.) Value between
Off and 3.0 Indicator (4) (bottom) in seconds
ton Wire feed with interval (0.1 – 5 sec.)
Only if function type
(7)
‘interval’ has
been selected
Value between
0.1 and 5.0 Indicator (4) (bottom) in seconds
tof Wire feed interval break
(0.1 – 5 sec.)
Only if function type
(7) ‘interval’ has
been selected
Value between
0.1 and 5.0 Indicator (4) (bottom) in seconds
run While welding with a wire feed
- - - During the break with an interval
Tab. 9 Display indicators after switching on