TIG cold-wire feeder
6 Putting into operation
BAL.0415.0 • 2018-10-22
EN - 13
6.3.3 Advanced functions
Press buttons
simultaneously to switch to parameter selection mode.
Display indicators
Depending on the default settings, the knob
can be used to increase or decrease the values.
Fig. 5 Front panel display on page EN-11
1
Wire retraction/function button
2
Wire feed
Fig. 8
Advanced functions
1
2
Left display (1)
Right display (2)
Indicator
Description
Indicator
Description
F1
Soft start (during operation)
Value between
Off and 2.0
(bottom) in seconds
Wire slowly starts to run
Fig. 5 Front panel display on page EN-11
F2
Wire retraction feed rate
Value between
0.5 and 3.0
(top) in m/min
Fig. 5 Front panel display on page EN-11
F3
Soft start for wire feed
ON – OFF
Wire slowly starts to run
F4
Wire feed rate
0.5 – 8.0
(top) in m/min
Fig. 5 Front panel display on page EN-11
F5
Function types of the torch triggers
A/b/C
Only possible if the power source should also
be controlled
6.11 Connecting the torch and the welding
device on page EN-23
F6
Power source shut down with
2 and 4-cycle
2 – 4
Optional torch required
F7
Special interval function
ON – OFF
Wire retraction while welding
Tab. 10
Display indicators for advanced functions
