EN - 6
BAL.0415.0 • 2018-10-22
4 Scope of delivery
TIG cold-wire feeder
3.2 Abbreviations
3.3 Nameplate
The ABIDRIVE V2 is labelled with a nameplate on the top of the housing as follows:
When making enquiries, please note the following information:
• Device type, device number
3.4 Signs and symbols used
The following signs and symbols are used in the operating instructions:
4 Scope of delivery
Coolant inlet pressure
Min. 2.5 bar/max. 3.5 bar
Coolant connections
Plug-in nipple, nom. diam. 5 mm
Gas connection
Plug-in nipple, nom. diam. 5 mm/max. 5 bar
Power fitting
Panel plug 70 – 95
Wire diameter
0.8 – 2.4 mm
Tab. 4
Technical data
TIG
Tungsten Inert Gas
Tab. 5
Abbreviations
Fig. 2
TIG cold-wire feeder
nameplate
Symbol
Description
•
Bullet symbol for instructions and lists
Cross reference symbol refers to detailed, supplementary or further information
1
Step(s) described in the text to be carried out in succession
• Operating instructions
•
TIG cold-wire feeder
wire feeding unit
Tab. 6
Scope of delivery
• Fitted with standard rolls 0.8 mm – 1.6 mm
Tab. 7
Option
