abem Terrameter LS, Инструкция по эксплуатации

Страница: 85 / 114

ABEM Terrameter LS
75
Figure 87. Examples of analysis of spread and protocol respectively
Having many spreads and protocols installed in the instrument can slow down the
process of creating a new
Task . It may therefore be useful to remove those that will
not be used using the “Delete file from Terrameter” command.
Note! Be careful not to remove anything that may be needed in
the field and make sure to verify that a new
Task
can be
initiated with the desired spread and protocol before
going to the field.
Conversion of address and protocol files in the style used by Terrameter
SAS1000/SAS4000 into the XML format used by Terrameter LS can be done via the
utility software. Select the “Protocols/Convert ADR to XML Spread File” (Figure 88)
or “Protocols/Convert ORG to XML Protocol File” (Figure 89) menu item to start a
conversion. Simply press Start, select the input file to convert and then the name and
the location of the output file and conversion runs automatically. For the conversion
of protocol files the software will check that the used electrodes are within the range
of the used electrode spread by checking it against the corresponding ADR file, if the
ADR is not found warning messages are issued but that does not mean that any error
has been detected.