abem Terrameter LS, Инструкция по эксплуатации

Страница: 105 / 114

ABEM Terrameter LS
95
• <SwitchAddress> defines how the electrode is connected to the relay switch.
• <SwitchId> specifies which relay switch is used (default = 0 is equal to internal
relay switch).
The initial part of spread description file is shown below as example.
Example
<?xml version="1.0" encoding="UTF-8" ?>
<Spread>
<Name> 4X21 </Name>
<Description> 4 cables with 21 take-outs each with overlapping take-out at cable ends
</Description>
<Rollalong>
<X> 20 </X>
<Y> 0 </Y>
</Rollalong>
<Cable>
<Name> 1 </Name>
<Electrode>
<Id> 1 </Id>
<X> 0 </X>
<Name> 1-1 </Name>
<SwitchAddress> 22 </SwitchAddress>
</Electrode>
<Electrode>
<Id> 2 </Id>
<X> 1 </X>
<Name> 1-2 </Name>
<SwitchAddress> 0 </SwitchAddress>
</Electrode>
etc.
If and external relay switch of type ES10-64 is used this must also be defined in the
spread file by adding the SwitchId as shown in this example:
<Cable>
<Name> 5 </Name>
<Electrode>
<Id> 65 </Id>
<X> 64 </X>
<Name> 5-1 </Name>
<SwitchId> 2 </SwitchId>
<SwitchAddress> 1 </SwitchAddress>
</Electrode>