ABB UniSec DY800, Инструкции по установке, обслуживанию и техническому обслуживанию

Страница: 3 / 30

3 D I S T R I B U T I O N S O LU T I O N S
—
1. Packing and transport
Strictly comply with the indications on
the pictograms and the instructions on
the packaging
Each cubicle is protected by a plastic cover to
prevent water from infiltrating if it rains when the
loading and unloading operations are performed
and to keep the dust off during storage.
The cubicles are placed on wooden pallets and fixed
in place with four bolts, one per corner.
The loading platform of the vehicle that transports
the cubicles must be no more than 1.5 m from the
ground so that the overall height is 4 m maximum.
The surface of the loading platform must be non-
slip with a high coefficient of friction.
The assemblies must be arranged cross-wise and
back to back on the platform with suitable material
in between so as to prevent them from touching and
pressing against each other.
Frame members must be arranged on the platform
so as to space out the units and prevent them from
shifting in either the longitidunal or cross-wise
directions.
The units must be fastened to the structure of the
vehicle with ropes so as to avoid damage and
prevent them from tipping over when the transport
vehicle is driven round bends or is sharply braked.
The vehicle must also be covered by a tarpaulin.