ABB UniSec DY800, Инструкции по установке, обслуживанию и техническому обслуживанию

Страница: 5 / 30

>1000
Movimentazione con carrello elevatore
Movimentazione con gru
5 D I S T R I B U T I O N S O LU T I O N S
—
4. Handling
Lifting by crane Handling with a lift truck
Make sure that the insulating parts of the
apparatus are not damaged when the cubicles are
handled
Before proceeding with any operation, always
make sure that the springs of the operating
mechanism are not loaded and that the apparatus
is in the open position
Keep the cubicles in the vertical position when
using a lift truck for handling purposes
UniSec switchgear is normally placed on a wooden
pallet and fastened with four bolts, one per corner.
For handling purposes the switchgear can be lifted
by crane, using ropes with snap hooks conforming
to the safety standards inserted through the
eyebolts on the top of the units, or by fork lift truck.
In this case, the forks must be inserted at the sides
where the cubicle is joined, for improved stability
during the handling operations.
The center of gravity of the cubicles is high.
To prevent them from tipping over, proceed very
slowly and with extreme caution when handling
them with a forklift truck.