manualshive.com logo in svg

ABB SCU200, Руководство пользователя

Поделиться
Скачать
ABB SCU200 Скачать руководство пользователя страница 7

7

SCU200 

INSITE ENERGY MANAGEMENT SYSTEM

1.2.Cleaning

Use a dry cloth.

1.3.Installation to mains

Installation of device to mains shall include a switch or circuit breaker for the connection to mains. 

The switch or circuit breaker must be suitably located and easily reachable and must be marked as the 

disconnecting device for the device.

1.4.Disconnection from mains or connections to mains

Switch off circuit breaker or switch before disconnecting from the mains supply or connecting to the 

mains supply. Same applies for all other connections (L1, L2, L3, N).

1.5.Safety warnings

Attention: Non-adherence to the following points can lead to serious injury or death. Use the suitable 

personal protection devices and adhere to the current regulations governing electrical safety.

This device must be installed exclusively by qualified personnel who have read all of the information 

relative to the installation.

Check that the voltage on the main side is compatible with the range permitted by the device.

Ensure that all current and voltage supplies are disconnected prior to carrying out any controls, visual 

inspections and tests on the device.

Always assume that all circuits are under voltage until they are completely disconnected, subjected to 

tests and labelled.

Disconnect all of the power supply prior to working on the device.

Always use a suitable voltage detection device to check that the supply is interrupted.

Pay attention to any dangers and carefully check the work area ensuring that no instruments or foreign 

objects have been left inside the compartment in which the device is housed.

The correct use of this device depends on a correct manipulation, installation and use.

Failure to adhere to the basic installation information can lead to injuries as well as damage to the 

electric instruments or to any other product.

The tests carried out at a high voltage can damage the device’s electronic components.

1.6.Disposal

Defective devices must be disposed of as special waste at the appropriate collection points set up for 
this purpose. National or regional regulations on the disposal of special waste must be followed.

1.7.Service and maintenance

The device undergoes several safety assessments before shipment and will be sealed. If a device is opened, 

the safety assessments have to be repeated. A warranty will be provided for unopened devices only.

Содержание SCU200

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды