manualshive.com logo in svg

ABB SCU200, Руководство пользователя

Поделиться
Скачать
ABB SCU200 Скачать руководство пользователя страница 6

6

SCU200 

INSITE ENERGY MANAGEMENT SYSTEM

1.General Information

This manual contains all the safety information, the technical aspects and the operating necessary to 

ensure the correct use of the device and maintain it in safe conditions.

1.1.Use and Storage of the manual

1.1.1.Storing

The manual must be stored close to the device; safe from liquids and anything else which may 

compromise its legibility. The manual and the declaration of conformity are both an integral part of the 

device until it is dismantled. If the manual is lost or illegible please request a copy from the manufacturer.

1.1.2.Copyright

The copyright of this manual is the property of ABB Ltd. This manual contains texts, designs and 

illustrations of a technical nature which must not be disclosed or transmitted to third parties, even 

partially, without the written authorisation of ABB Ltd.

1.1.3.Liability disclaimer

The information contained in this document is subject to change without notice and cannot be 

considered as an obligation by ABB Ltd. ABB Ltd. is not liable for any errors that may appear in this 

document. ABB Ltd. is not liable under any circumstances for any direct, indirect, special, incidental or 

consequential damage of any kind that may arise from using this document. ABB Ltd. is also not liable for 

incidental or consequential damage that may arise from using the software or hardware mentioned in 

this document.

1.1.4.Brand

ABB Ltd. is a registered trademark of ABB Group. All other brands or product names mentioned in this 

document are trademarks or registered trademarks of their respective owners.

1.1.5.Meaning of symbols

Warning – can result in death or 
serious personal injury

Non-safety related, but useful and 
important information

CE conformity mark

Torque

Observe the accompanying 
documents

Disposal

Installation, electrotechnical 
expertise

Equipment protected throughout by 
reinforced insulation

Содержание SCU200

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды